How To Remove Dresser Drawer With Center Metal Slide (5 Easy Steps)

Source

There are many reasons to take drawers out of a dresser or cabinets, such as moving or repairing them. Usually, removing drawers seems like a simple task. Yet, for complex slides, especially the center metal slide, this can be a frustrating problem.

Because dresser drawers are wider than usual, people often install them with the center metal slide. Thus, “how to remove dresser drawer with center metal slide” is a real-life question. This article will provide detailed instructions suitable for everyone to do it themselves at home.

3 Main Reason Why Dresser Drawers Get Stuck 

Old drawers

For the time being, metal parts of the drawers corrode as they age. Hence, when more dust builds, the drawer encounters the issue of not sliding in and out as usual. When a drawer starts to rust, one of the best solutions is replacing it or any other hardware.

Humidity

Weather conditions, such as humidity, maybe a significant cause for the drawers to become stuck. In detail, increased moisture in the air makes wood tend to swell. Thus, the quick method to make glide smoothly again is applying lubricant to the sides of the dresser drawer.

Debris accumulation

Debris may accumulate in the drawer slides over time. The majority of this material is tiny particles and bits that become trapped in the drips and may hinder the drawer from moving smoothly. In this case, it is necessary to remove the drawers for cleaning.

How To Remove A Dresser Drawer With Center Metal Slide (5 Quick Steps)

As mentioned before, you may have difficulty with removing dresser drawers. This section will give you a step-by-step guide regarding checking and tips.

Step 1: Check the drawer slide for a release mechanism

In general, the center slides usually have no locking mechanism. Yet, it is better to check than ignore. Furthermore, while checking, it also helps you ensure that the slide is a center mount slide. However, here are some tips that may be useful:

  • If the drawer has two metal slides on any side, it is an under-mount drawer slide. Moreover, there should be two easy pushes to release levers on this.
  • Yet, if the drawer pulls out extremely readily by just raising it when fully extended, the slides must be a bottom-mounted epoxy type.
  • If the drawer has two visible release levers when in a fully expanded status,  it’s a side mount ball bearing slide drawer. To come out, just press one side up while keeping the other side down (due to their reversion during installation) and pushing.

Source

Step 2: Look for the pull-out guard of the drawer

As a protective item, almost all drawers have a specific piece of plastic to prevent them from fully opening. Hence, be careful and look for one of two things below as the pull-out guard of the drawer: 

  • A semicircular piece of plastic that works as an inverted speed bump.
  • When completely extended, a specific plastic flap touches the bottom rear of the drawer. However, this type of flap is only visible from within the cabinet. As a result, you are more likely to hear its sound rather than seeing it.

If your dresser drawer has one of these two types of pull-out guard, you need to regularly apply some opening force to the drawer. Following that guide will make it easier to peel away from the plastic component. However, in this step, you might be cautious to avoid pinching your fingertips.

Step 3: Use some pressure to pull out the drawers

With an old dresser drawer, using excessive force to pull it out can lead to damage. Indeed, if the track utilizes a plastic guide on a metal track, that guide is likely to be broken.

Firstly, it is necessary to use gentle force to open the drawer and check whether it gets stuck on an obstacle or not. Then you can wiggle it from time to time while exerting pressure so that it can go across any damaged areas. Furthermore, people recommend using a tool to apply some opening force to the drawer sides, especially for those without a dovetail.

However, carefulness should be a forefront factor not to pinch, slam, or get yourself hurt when trying to pull out the drawers. 

Step 4: Remove the drawers one by one

Honestly, if you find it impossible to pull a drawer out, it is because the drawer you attempt to open has broken parts. Thus, try to remove another drawer to avoid wasting time and confusion. When successfully opening one drawer, you’ll acquire more experience that may apply to others.

Step 5: Check the slides

Usually, it’s hard to inspect the slides while the drawers are inside. Thus, once removing the dresser drawer, it’s a chance to take a look at the slides to check out whether something is broken or create a hard block. 

Source

Furthermore, a putty knife is an excellent check tool to run it down either side of the track with the drawer slide fully open due to not seeing the slides. And remember to try it on a drawer you can remove and then on a drawer you can’t. After all, by comparing the feeling, you will know which part has been broken.

Finally, extreme pressure to pull the broken drawer out may be the only choice if no method works. Then, of course, you’ll have to go through a repair process for that drawer later on.

Conclusion 

The tasks related to home appliance repair are not as simple as you imagine. Indeed, removing dresser drawers also requires meticulousness to avoid injury and damage to the cabinet.

In short, this article has provided some valuable tips on how to remove dresser drawer with center metal slide. Hopefully, these helpful tips can save your time and make your life easier.